수소액화 : 지구의 내일의 발전을 가능하게 하다. H2X

2024

Pham TM, Im K, Oh S, Han J, Kim J. Enriched Ti3+ in TiONC electrocatalyst for efficient H2O2 generation via 2-electron oxygen reduction reaction. Chemical Engineering Journal 2024;482.

Nguyen QH, Tinh VDC, Oh S, Pham TM, Tu TN, Kim D, et al. Metal-organic framework-polymer complex-derived single-atomic oxygen reduction catalyst for anion exchange membrane fuel cells. Chemical Engineering Journal 2024;481.

2023

Woo SH, Lee NJ, Yook SH, Kim HS, Choi J, Kim JH, et al. Indicator Sensor Development and Fuel Cell Degradation Imaging. Adv Funct Mater 2023;33.

2022

Choi H Il, Sung YJ, Hong ME, Han J, Min BK, Sim SJ. Reconsidering the potential of direct microalgal biomass utilization as end-products: A review. Renewable and Sustainable Energy Reviews 2022;155.

Lee CH, Kwon BW, Oh JH, Kim S, Han J, Nam SW, et al. Integration of dry-reforming and sorption-enhanced water gas shift reactions for the efficient production of high-purity hydrogen from anthropogenic greenhouse gases. Journal of Industrial and Engineering Chemistry 2022;105:563–70.

Kim SH, Song HC, Yoo SJ, Han J, Lee KY, Ham HC. Impact of the dopant-induced ensemble structure of hetero-double atom catalysts in electrochemical NH3 production. J Mater Chem A Mater 2022;10:6216–30.

2021

Cha J, Lee T, Lee YJ, Jeong H, Jo YS, Kim Y, et al. Highly monodisperse sub-nanometer and nanometer Ru particles confined in alkali-exchanged zeolite Y for ammonia decomposition. Appl Catal B 2021;283.

Kwak Y, Shin H, Moon S, Lee K, Kirk J, Park Y, et al. Investigation of a hydrogen generator with the heat management module utilizing liquid-gas organic phase change material. Int J Energy Res 2021;45:10378–92.

Park Y, Kwak Y, Yu S, Badakhsh A, Lee YJ, Jeong H, et al. Degradation mechanism of a Pd/Ta composite membrane: Catalytic surface fouling with inter-diffusion. J Alloys Compd 2021;854.

Kim DY, Ryu S, Kim HJ, Ham HC, Sohn H, Yoon SP, et al. Highly selective asymmetric polybenzimidazole-4,4′-(hexafluoroisopropylidene) bis(benzoic acid) hollow fiber membranes for hydrogen separation. Sep Purif Technol 2021;257.

2020

Park Y, Cha J, Oh HT, Lee T, Lee SH, Park MG, et al. A catalytic composite membrane reactor system for hydrogen production from ammonia using steam as a sweep gas. J Memb Sci 2020;614.

Kim Y, Kwak Y, Lee YJ, Jo YS, Sohn H, Jeong H, et al. Compact ATR-WGS-Integrated Bioethanol Fuel Processor for Portable and On-board Fuel Cell Applications. ACS Sustain Chem Eng 2020;8:15611–9.

Lee CH, Jo YS, Park Y, Jeong H, Kim Y, Sohn H, et al. Unconventional hydrogen permeation behavior of Pd/BCC composite membranes and significance of surface reaction kinetics. J Memb Sci 2020;595.

2019

Lee Y, Kim S, Maljusch A, Conradi O, Kim HJ, Jang JH, et al. Polybenzimidazole membranes functionalised with 1-methyl-2-mesitylbenzimidazolium ions via a hexyl linker for use in vanadium flow batteries. Polymer (Guildf) 2019;174:210–7.

Kim GS, Lee BY, Ham HC, Han J, Nam SW, Moon J, et al. Highly active and stable Sr0.92Y0.08Ti1−xRuxO3−d in dry reforming for hydrogen production. Int J Hydrogen Energy 2019:202–12.

2018

Jo YS, Cha J, Lee CH, Jeong H, Yoon CW, Nam SW, et al. A viable membrane reactor option for sustainable hydrogen production from ammonia. J Power Sources 2018;400:518–26.

Kwon BW, Oh JH, Kim GS, Yoon SP, Han J, Nam SW, et al. The novel perovskite-type Ni-doped Sr0.92Y0.08TiO3 as a reforming biogas (CH4 + CO2) for H2 production. Appl Energy 2018;227:213–9.

Jung J, Chung YH, Park HY, Han J, Kim HJ, Henkensmeier D, et al. Electrochemical impedance analysis with transmission line model for accelerated carbon corrosion in polymer electrolyte membrane fuel cells. Int J Hydrogen Energy 2018;43:15457–65.

Krishnan NN, Lee S, Ghorpade R V., Konovalova A, Jang JH, Kim HJ, et al. Polybenzimidazole (PBI-OO) based composite membranes using sulfophenylated TiO2 as both filler and crosslinker, and their use in the HT-PEM fuel cell. J Memb Sci 2018;560:11–20.

Cha J, Jo YS, Jeong H, Han J, Nam SW, Song KH, et al. Ammonia as an efficient COX-free hydrogen carrier: Fundamentals and feasibility analyses for fuel cell applications. Appl Energy 2018;224:194–204.

Jo YS, Lee CH, Kong SY, Lee KY, Yoon CW, Nam SW, et al. Characterization of a Pd/Ta composite membrane and its application to a large scale high-purity hydrogen separation from mixed gas. Sep Purif Technol 2018;200:221–9.

Accardo G, Frattini D, Ham HC, Han JH, Yoon SP. Improved microstructure and sintering temperature of bismuth nano-doped GDC powders synthesized by direct sol-gel combustion. Ceram Int 2018;44:3800–9.

2017

Ham HC, Choi SH, Jang S-C, Song SA, Yoon SP, Han J, et al. Novel Fabrication of Porous Ni-5 wt.% Al Alloy Electrode Below the Melting Point of Aluminum. Sci Adv Mater 2017;9:2131–6.

Kong J, Lim A, Yoon C, Jang JH, Ham HC, Han J, et al. Electrochemical Synthesis of NH3 at Low Temperature and Atmospheric Pressure Using a γ-Fe2O3 Catalyst. ACS Sustain Chem Eng 2017;5:10986–95.

Doh H, Kim HY, Kim GS, Cha J, Park HS, Ham HC, et al. Influence of Cation Substitutions Based on ABO3 Perovskite Materials, Sr1-xYxTi1-yRuyO3-δ, on Ammonia Dehydrogenation. ACS Sustain Chem Eng 2017;5:9370–9.

Kim DH, Kong SY, Lee GH, Yoon CW, Ham HC, Han J, et al. Effect of PBI-HFA surface treatments on Pd/PBI-HFA composite gas separation membranes. Int J Hydrogen Energy 2017;42:22915–24.

Hermawan E, Sang Lee G, Sik Kim G, Chul Ham H, Han J, Pil Yoon S. Densification of an YSZ electrolyte layer prepared by chemical/electrochemical vapor deposition for metal-supported solid oxide fuel cells. Ceram Int 2017;43:10450–9.

Lee CW, Kwon BW, Kang MG, Ham HC, Yoon SP, Han J, et al. Improved performance of molten carbonate fuel cells with (Li/Na)2CO3 electrolytes by using BYS coated cathode at low operating temperatures. Int J Hydrogen Energy 2017;42:18514–23.

Frattini D, Accardo G, Moreno A, Yoon SP, Han JH, Nam SW. A novel Nickel-Aluminum alloy with Titanium for improved anode performance and properties in Molten Carbonate Fuel Cells. J Power Sources 2017;352:90–8.

Lee M, Lee CW, Ham HC, Han J, Yoon SP, Lee KB. Mechanical strength improvement of aluminum foam-reinforced matrix for molten carbonate fuel cells. Int J Hydrogen Energy 2017;42:16235–43.

Kong SY, Kim DH, Henkensmeier D, Kim HJ, Ham HC, Han J, et al. Ultrathin layered Pd/PBI–HFA composite membranes for hydrogen separation. Sep Purif Technol 2017;179:486–93.

Cho J, Lee S, Yoon SP, Han J, Nam SW, Lee KY, et al. Role of Heteronuclear Interactions in Selective H2 Formation from HCOOH Decomposition on Bimetallic Pd/M (M = Late Transition FCC Metal) Catalysts. ACS Catal 2017;7:2553–62.

Accardo G, Frattini D, Moreno A, Yoon SP, Han JH, Nam SW. Influence of nano zirconia on NiAl anodes for molten carbonate fuel cell: Characterization, cell tests and post-analysis. J Power Sources 2017;338:74–81.

Sung YE, Jang JH, Lee SY, Lee BS, Kim HJ, Henkensmeier D, et al. Effect of Catalyst Layer Ionomer Content on Performance of Intermediate Temperature Proton Exchange Membrane Fuel Cells (IT-PEMFCs) under Reduced Humidity Conditions. Electrochim Acta 2017;224:228–34.

Singh B, Duong NMH, Henkensmeier D, Jang JH, Kim HJ, Han J, et al. Influence of Different Side-groups and Cross-links on Phosphoric Acid Doped Radel-based Polysulfone Membranes for High Temperature Polymer Electrolyte Fuel Cells. Electrochim Acta 2017;224:306–13.

Joseph D, Krishnan NN, Henkensmeier D, Jang JH, Choi SH, Kim HJ, et al. Thermal crosslinking of PBI/sulfonated polysulfone based blend membranes. J Mater Chem A Mater 2017;5:409–17.

2016

Lee CW, Lee M, Lee MJ, Chang SC, Yoon SP, Ham HC, et al. Effect of the flow directions on a 100 cm2 MCFC single cell with internal flow channels. Int J Hydrogen Energy 2016;41:18747–60.

Kang MG, Lee CW, Dong HS, Jang SC, Song SA, Park HS, et al. Effects of vibrations in marine environments on performance of molten-carbonate fuel cells. Int J Hydrogen Energy 2016;41:18732–8.

Kim HK, Lee CW, Kim M, Oh JH, Song SA, Jang SC, et al. Preparation of CoMo/Al2O3, CoMo/CeO2, CoMo/TiO2 catalysts using ultrasonic spray pyrolysis for the hydro-desulfurization of 4, 6-dimethyldibenzothiophene for fuel cell applications. Int J Hydrogen Energy 2016;41:18846–57.

Jeon M, Han DJ, Lee KS, Choi SH, Han J, Nam SW, et al. Electronically modified Pd catalysts supported on N-doped carbon for the dehydrogenation of formic acid. Int J Hydrogen Energy 2016;41:15453–61.

Lee JH, Cho J, Jeon M, Ridwan M, Park HS, Choi SH, et al. Experimental and computational studies of formic acid dehydrogenation over PdAu: Influence of ensemble and ligand effects on catalysis. J Mater Chem A Mater 2016;4:14141–7.

Kang MG, Park HS, Ham HC, Jang S-C, Yoon CW, Han J, et al. Effect of Cs 2 CO 3 in Li/K and Li/Na Carbonate on the Oxygen Reduction Reaction for MCFC. J Electrochem Soc 2016;163:F962–7.

Kim M, Lee BY, Ham HC, Han J, Nam SW, Lee HS, et al. Facile one-pot synthesis of tungsten oxide (WO3-x) nanoparticles using sub and supercritical fluids. Journal of Supercritical Fluids 2016;111:8–13.

Ham HC, Hwang GS, Han J, Yoon SP, Nam SW, Lim TH. Importance of Pd monomer pairs in enhancing the oxygen reduction reaction activity of the AuPd(1 0 0) surface: A first principles study. Catal Today 2016;263:11–5.

Krishnan NN, Henkensmeier D, Park YH, Jang JH, Kwon T, Koo CM, et al. Blue membranes: Sulfonated copper(II) phthalocyanine tetrasulfonic acid based composite membranes for DMFC and low relative humidity PEMFC. J Memb Sci 2016;502:1–10.

Lee S, Cho J, Jang JH, Han J, Yoon SP, Nam SW, et al. Impact of d-Band Occupancy and Lattice Contraction on Selective Hydrogen Production from Formic Acid in the Bimetallic Pd3M (M = Early Transition 3d Metals) Catalysts. ACS Catal 2016;6:134–42.

2015

Cho J, Lee S, Han J, Yoon SP, Nam SW, Choi SH, et al. Enhanced selectivity to H2 formation in decomposition of HCOOH on the Ag19@Pd60 core-shell nanocluster from first-principles. J Nanosci Nanotechnol 2015;15:8233–7.

Hink S, Elsøe K, Cleemann LN, Henkensmeier D, Jang JH, Kim HJ, et al. Phosphoric acid doped polysulfone membranes with aminopyridine pendant groups and imidazole cross-links. Eur Polym J 2015;72:102–13.

Ridwan M, Tamarany R, Han J, Nam SW, Ham HC, Kim JY, et al. Atomically dispersed Cu on Ce1-xRExO2-δ nanocubes (RE = La and Pr) for water gas shift: influence of OSC on catalysis. RSC Adv 2015;5:89478–81.

Choi SH, Kim DH, Kim DY, Han JY, Yoon CW, Ham HC, et al. A highly selective polybenzimidazole-4,4′-(hexafluoroisopropylidene)bis(benzoic acid) membrane for high-temperature hydrogen separation. J Appl Polym Sci 2015;132.

Hink S, Duong NMH, Henkensmeier D, Kim JY, Jang JH, Kim HJ, et al. Radel-based membranes with pyridine and imidazole side groups for high temperature polymer electrolyte fuel cells. Solid State Ion 2015;275:80–5.

Bui QTP, Kim Y, Nguyen HTB, Nam SW, Han JH, Ham HC, et al. Steam Reforming of Biogas over CeO2-Coated Ni-Al Plate Catalysts. Catal Letters 2015;145:1403–12.

Hink S, Henkensmeier D, Jang JH, Kim HJ, Han J, Nam SW. Reduced in-plane swelling of Nafion by a biaxial modification process. Macromol Chem Phys 2015;216:1235–43.

Bui QTP, Kim Y, Yoon SP, Han J, Ham HC, Nam SW, et al. Steam reforming of simulated biogas over plate Ni-Cr catalysts: Influence of pre-oxidation on catalytic activity. Appl Catal B 2015;166–167:335–44.

Choi SH, Park DN, Yoon CW, Yoon SP, Nam SW, Hong SA, et al. A study on the electrochemical performance of 100-cm2 class direct carbon-molten carbonate fuel cell (DC-MCFC). Int J Hydrogen Energy 2015;40:5144–9.

Choi H, Kim D, Yoon SP, Han J, Ha S, Kim J. Production of molybdenum oxide particles with high yield by ultrasonic spray pyrolysis and their catalytic activity toward partial oxidation of n-dodecane. J Anal Appl Pyrolysis 2015;112:276–83.

Ham HC, Manogaran D, Hwang GS, Han J, Kim HJ, Nam SW, et al. Role of different Pd/Pt ensembles in determining CO chemisorption on Au-based bimetallic alloys: A first-principles study. Appl Surf Sci 2015;332:409–18.

Kim CE, Lim DH, Jang JH, Kim HJ, Yoon SP, Han J, et al. Effect of gold subsurface layer on the surface activity and segregation in Pt/Au/Pt3M (where M = 3 d transition metals) alloy catalyst from first-principles. Journal of Chemical Physics 2015;142.

Noh SJ, Yoon SP, Han J, Park S, Kim J. Synthesis and characterization of ZIF-7 membranes by in Situ method. J Nanosci Nanotechnol 2015;15:575–8.

2014

Nguyen HVP, Kang MG, Ham HC, Choi SH, Han J, Nam SW, et al. A New Cathode for Reduced-Temperature Molten Carbonate Fuel Cells. J Electrochem Soc 2014;161:F1458–67.

Cho J, Lee S, Han J, Yoon SP, Nam SW, Choi SH, et al. Importance of ligand effect in selective hydrogen formation via formic acid decomposition on the bimetallic Pd/Ag catalyst from first-principles. Journal of Physical Chemistry C 2014;118:22553–60.

Cho MK, Lee DN, Kim YY, Han J, Kim HJ, Cho E, et al. Analysis of the spatially distributed performance degradation of a polymer electrolyte membrane fuel cell stack. Int J Hydrogen Energy, vol. 39, Elsevier Ltd; 2014, p. 16548–55.

Kim HY, Choi I, Ahn SH, Hwang SJ, Yoo SJ, Han J, et al. Analysis on the effect of operating conditions on electrochemical conversion of carbon dioxide to formic acid. Int J Hydrogen Energy, vol. 39, Elsevier Ltd; 2014, p. 16506–12.

Hernandez JM, Lim DH, Nguyen HVP, Yoon SP, Han J, Nam SW, et al. Decomposition of hydrogen sulfide (H2S) on Ni(100) and Ni 3Al(100) surfaces from first-principles. Int J Hydrogen Energy, vol. 39, Elsevier Ltd; 2014, p. 12251–8.

Nguyen HVP, Othman MR, Seo D, Yoon SP, Ham HC, Nam SW, et al. Nano Ni layered anode for enhanced MCFC performance at reduced operating temperature. Int J Hydrogen Energy, vol. 39, Elsevier Ltd; 2014, p. 12285–90.

Jang SC, Lee BY, Nam SW, Ham HC, Han J, Yoon SP, et al. New method for low temperature fabrication of Ni-Al alloy powder for molten carbonate fuel cell applications. Int J Hydrogen Energy, vol. 39, Elsevier Ltd; 2014, p. 12259–65.

Lee JH, Ryu J, Kim JY, Nam SW, Han JH, Lim TH, et al. Carbon dioxide mediated, reversible chemical hydrogen storage using a Pd nanocatalyst supported on mesoporous graphitic carbon nitride. J Mater Chem A Mater 2014;2:9490–5.

Kim HS, Kim GS, Yun JW, Ham HC, Jang JH, Han J, et al. Pd catalyzed Sr0.92Y0.08TiO3-δ/ Sm0.2Ce0.8O2-δ anodes in solid oxide fuel cells. Ceram Int 2014;40:8237–44.

Lim DH, Kim HS, Yoon SP, Han J, Yoon CW, Choi SH, et al. Mechanisms of enhanced sulfur tolerance on samarium (Sm)-doped cerium oxide (CeO2) from first principles. Physical Chemistry Chemical Physics 2014;16:10727–33.

Harshini D, Lee DH, Jeong J, Kim Y, Nam SW, Ham HC, et al. Enhanced oxygen storage capacity of Ce0.65Hf0.25M0.1O2-δ (M=rare earth elements): Applications to methane steam reforming with high coking resistance. Appl Catal B 2014;148–149:415–23.

Harshini D, Lee DH, Kim Y, Nam SW, Han JH, Ham HC, et al. Catalytic hydrogen production via dry reforming of methane over Ni/Ce 0.65Hf0.25M0.1O2-δ (M = Tb, Sm, Nd, Pr and La). Catal Letters 2014;144:656–62.

2013

Jung YG, Kim Y, Lee DH, Jang SC, Nam SW, Han JH, et al. Autothermal reforming of iso-octane and gasoline over Rh-based catalysts: Influence of CeO2/γ-Al2O3-based mixed oxides on hydrogen production. Int J Hydrogen Energy 2013;38:15140–51.

Song SA, Kim HG, Ham HC, Han J, Nam SW, Yoon SP. Effects of marine atmosphere on the cell performance in molten carbonate fuel cells. J Power Sources 2013;232:17–22.

Nguyen HVP, Song SA, Seo D, Han J, Yoon SP, Ham HC, et al. Hydrogen sulfide-resilient anodes for molten carbonate fuel cells. J Power Sources 2013;230:282–9.

2012

Song SA, Jang SC, Han J, Yoon SP, Nam SW, Oh IH, et al. Electrode performance of a new La0.6Sr0.4Co 0.2Fe0.8O3 coated cathode for molten carbonate fuel cells. Int J Hydrogen Energy, vol. 37, 2012, p. 19304–11.

Nguyen HVP, Song SA, Park DN, Ham HC, Han J, Yoon SP, et al. Improved molten carbonate fuel cell performance via reinforced thin anode. Int J Hydrogen Energy 2012;37:16161–7.

Nguyen HVP, Song SA, Seo D, Park DN, Ham HC, Oh IH, et al. Fabrication of Ni-Al-Cr alloy anode for molten carbonate fuel cells. Mater Chem Phys 2012;136:910–6.

Song SA, Park S Bin, Han J. Synthesis of zirconium-based material-coated LiNi 0.8Co 0.2O 2 cathode using a new coating method. Jpn J Appl Phys 2012;51.

Falcucci G, Jannelli E, Minutillo M, Ubertini S, Han J, Yoon SP, et al. Integrated numerical and experimental study of a MCFC-plasma gasifier energy system. Appl Energy 2012;97:734–42.

Ham HC, Stephens JA, Hwang GS, Han J, Nam SW, Lim TH. Role of small Pd ensembles in boosting CO oxidation in AuPd alloys. Journal of Physical Chemistry Letters 2012;3:566–70.

Yun JW, Yoon SP, Kim HS, Han J, Nam SW. Effect of Sm0.2Ce0.8O1.9 on the carbon coking in Ni-based anodes for solid oxide fuel cells running on methane fuel. Int J Hydrogen Energy 2012;37:4356–66.

Harshini D, Yoon CW, Han J, Yoon SP, Nam SW, Lim TH. Catalytic steam reforming of propane over Ni/LaAlO3 catalysts: Influence of preparation methods and OSC on activity and stability. Catal Letters 2012;142:205–12.

2011

Song SA, Jang SC, Han J, Yoon SP, Nam SW, Oh IH, et al. Enhancement of cell performance using a gadolinium strontium cobaltite coated cathode in molten carbonate fuel cells. J Power Sources 2011;196:9900–5.

Baik SM, Han J, Kim J, Kwon Y. Effect of deactivation and reactivation of palladium anode catalyst on performance of direct formic acid fuel cell (DFAFC). Int J Hydrogen Energy 2011;36:14719–24.

Kim S, Han J, Kwon Y, Lee KS, Lim TH, Nam SW, et al. Effect of Nafion ionomer and catalyst in cathode layers for the direct formic acid fuel cell with complex capacitance analysis on the ionic resistance. Electrochim Acta, vol. 56, 2011, p. 7984–90.

Baik SM, Kim J, Han J, Kwon Y. Performance improvement in direct formic acid fuel cells (DFAFCs) using metal catalyst prepared by dual mode spraying. Int J Hydrogen Energy 2011;36:12583–90.

Cigolotti V, McPhail S, Moreno A, Yoon SP, Han JH, Nam SW, et al. MCFC fed with biogas: Experimental investigation of sulphur poisoning using impedance spectroscopy. Int J Hydrogen Energy, vol. 36, 2011, p. 10311–8.

Devianto H, Han J, Yoon SP, Nam SW, Lim TH, Oh IH, et al. The effect of impurities on the performance of bioethanol-used internal reforming molten carbonate fuel cell. Int J Hydrogen Energy, vol. 36, 2011, p. 10346–54.

Ham HC, Stephens JA, Hwang GS, Han J, Nam SW, Lim TH. Pd ensemble effects on oxygen hydrogenation in AuPd alloys: A combined density functional theory and Monte Carlo study. Catal Today, vol. 165, 2011, p. 138–44.

Jung WS, Han J, Yoon SP, Nam SW, Lim TH, Hong SA. Performance degradation of direct formic acid fuel cell incorporating a Pd anode catalyst. J Power Sources 2011;196:4573–8.

Patil KY, Yoon SP, Han J, Lim TH, Nam SW, Oh IH. The effect of lithium addition on aluminum-reinforced α-LiAlO2 matrices for molten carbonate fuel cells. Int J Hydrogen Energy 2011;36:6237–47.

Patil KY, Yoon SP, Han J, Lim TH, Nam SW, Oh IH, et al. Phase stabilities in molten Li/K carbonate of efficient matrix materials for molten carbonate fuel cells: Thermodynamic calculations and experimental investigations. J Mater Sci 2011;46:2557–67.

Song SA, Kang MG, Han J, Yoon SP, Nam SW, Oh I-H, et al. An Ag-Coated NiO Cathode for MCFCs Operating at Low Temperatures. J Electrochem Soc 2011;158:B660.

2010

Yun JW, Yoon SP, Han J, Park S, Kim HS, Nam SW. Ceria Coatings Effect on H[sub 2]S Poisoning of Ni/YSZ Anodes for Solid Oxide Fuel Cells. J Electrochem Soc 2010;157:B1825.

Li Z, Devianto H, Yoon SP, Han J, Lim TH, Lee HI. Electrolyte effect on the catalytic performance of Ni-based catalysts for direct internal reforming molten carbonate fuel cell. Int J Hydrogen Energy, vol. 35, 2010, p. 13041–7.

Ham HC, Hwang GS, Han J, Nam SW, Lim TH. Geometric parameter effects on ensemble contributions to catalysis: H2O2 formation from H2 and O2 on AuPd alloys. A first principles study. Journal of Physical Chemistry C 2010;114:14922–8.

Kim SH, Chung JH, Kim YT, Han J, Yoon SP, Nam SW, et al. SiO2/Ni and CeO2/Ni catalysts for single-stage water gas shift reaction. Int J Hydrogen Energy 2010;35:3136–40.

Devianto H, Li ZL, Yoon SP, Han J, Nam SW, Lim TH, et al. The effect of Al addition on the prevention of Ni sintering in bio-ethanol steam reforming for molten carbonate fuel cells. Int J Hydrogen Energy 2010;35:2591–6.

Kim JE, Han J, Yoon SP, Nam SW, Lim TH, Kim H. Mechanical properties of the lithium aluminate matrix for MCFC reinforced with metal oxide materials. Current Applied Physics 2010;10.

Devianto H, Li Z, Yoon SP, Han J, Nam SW, Lim TH, et al. The effect of electrolyte wettability on reforming catalyst in direct ethanol MCFC. Current Applied Physics 2010;10.

Choi HJ, Kim J, Kwon Y, Han J. Comparative study of three different catalyst coating methods for direct methanol fuel cells. J Power Sources 2010;195:160–4.

Yun JW, Yoon SP, Park S, Han J, Nam SW, Lim TH, et al. Modifying the cathodes of intermediate-temperature solid oxide fuel cells with a Ce0.8Sm0.2O2 sol-gel coating. Int J Hydrogen Energy 2009;34:9213–9.

Kim JE, Patil KY, Han J, Yoon SP, Nam SW, Lim TH, et al. Using aluminum and Li2CO3 particles to reinforce the α-LiAlO2 matrix for molten carbonate fuel cells. Int J Hydrogen Energy 2009;34:9227–32.

Jang JH, Jeon S, Cho JH, Kim S-K, Lee S-Y, Cho E, et al. Complex Capacitance Analysis of Ionic Resistance and Interfacial Capacitance in PEMFC and DMFC Catalyst Layers. J Electrochem Soc 2009;156:B1293.

Kim SH, Chung JH, Kim YT, Han J, Yoon SP, Nam SW, et al. Disk-type porous Ni-Cr bulk catalyst for hydrogen production by autothermal reforming of methane. Catal Today 2009;146:96–102.

Devianto H, Li Z, Yoon SP, Han J, Nam SW, Lim TH, et al. The effect of water on direct ethanol molten carbonate fuel cell. Catal Today 2009;146:2–8.

Hyung CH, Gyeong SH, Jonghee H, Suk WN, Tae HL. On the role of Pd ensembles in selective H2O2 formation on PdAu alloys. Journal of Physical Chemistry C 2009;113:12943–5.

2008

Oh YS, Lee HJ, Yoo M, Kim HJ, Han J, Kim TH. Synthesis of novel crosslinked sulfonated poly(ether sulfone)s using bisazide and their properties for fuel cell application. J Memb Sci 2008;323:309–15.

Kim BJ, Kwon K, Rhee CK, Han J, Lim TH. Modification of Pt nanoelectrodes dispersed on carbon support using irreversible adsorption of Bi to enhance formic acid oxidation. Electrochim Acta 2008;53:7744–50.

Oh YS, Lee HJ, Yoo M, Kim HJ, Han J, Kim K, et al. Azide-assisted cross-linked sulfonated poly(ether sulfone)s as stable and highly conductive membranes with low methanol diffusion coefficients. Chemical Communications 2008:2028–30.

Kim KY, Han J, Nam SW, Lim TH, Lee HI. Preferential oxidation of CO over CuO/CeO2 and Pt-Co/Al2O3 catalysts in micro-channel reactors. Catal Today 2008;131:431–6.

Lee JK, Lee J, Han J, Lim TH, Sung YE, Tak Y. Influence of Au contents of AuPt anode catalyst on the performance of direct formic acid fuel cell. Electrochim Acta 2008;53:3474–8.

2007

Jung WS, Han J, Ha S. Analysis of palladium-based anode electrode using electrochemical impedance spectra in direct formic acid fuel cells. J Power Sources 2007;173:53–9.

Ham HC, Maganyuk AP, Han J, Yoon SP, Nam SW, Lim TH, et al. Preparation of Ni-Al alloys at reduced temperature for fuel cell applications. J Alloys Compd 2007;446–447:733–7.

Ham HC, Yoon SP, Han J, Nam SW, Lim T-H, Hong S-A. Development of Reinforced Matrix for Molten Carbonate Fuel Cells by Using Sintering Aids. ECS Trans 2007;5:445–9.

Jeong KJ, Miesse CM, Choi JH, Lee J, Han J, Yoon SP, et al. Fuel crossover in direct formic acid fuel cells. J Power Sources 2007;168:119–25.

Lee J, Kong KY, Jung CR, Cho E, Yoon SP, Han J, et al. A structured Co-B catalyst for hydrogen extraction from NaBH4 solution. Catal Today 2007;120:305–10.

2006

Choi JH, Jeong KJ, Dong Y, Han J, Lim TH, Lee JS, et al. Electro-oxidation of methanol and formic acid on PtRu and PtAu for direct liquid fuel cells. J Power Sources 2006;163:71–5.

Ryu BH, Jang IG, Moon KH, Han J, Lim TH. Development of stabilized NiO cathodes for molten carbonate fuel cell. J Fuel Cell Sci Technol 2006;3:389–95.

Miesse CM, Jung WS, Jeong KJ, Lee JK, Lee J, Han J, et al. Direct formic acid fuel cell portable power system for the operation of a laptop computer. J Power Sources 2006;162:532–40.

Kim HJ, Krishnan NN, Lee SY, Hwang SY, Kim D, Jeong KJ, et al. Sulfonated poly(ether sulfone) for universal polymer electrolyte fuel cell operations. J Power Sources 2006;160:353–8.

Devianto H, Yoon SP, Nam SW, Han J, Lim TH. The effect of a ceria coating on the H2S tolerance of a molten carbonate fuel cell. J Power Sources 2006;159:1147–52.

Suk WN, Ha MJ, Han J, Sung PY, Lim TH, Hong SA. A miniature methanol steam reformer for polymer electrolyte fuel cell. Stud Surf Sci Catal, vol. 159, Elsevier Inc.; 2006, p. 657–60.

Nguyen Xuan Phuong Vo, Nam SW, Yoon SP, Han J, Lim T-H, Hong S-A. Performance of an anode-supported solid oxide fuel cell in a mixed-gas configuration. Stud Surf Sci Catal 2006;159:597–600.

Devianto H, Sung PY, Suk WN, Han J, Lim TH. Study on ceria coating effect on H2S tolerance in the anode of molten carbonate fuel cell. Stud Surf Sci Catal, vol. 159, Elsevier Inc.; 2006, p. 601–4.

Youn JY, Yoon SP, Han J, Nam SW, Lim TH, Hong SA, et al. Fabrication and characteristics of anode as an electrolyte reservoir for molten carbonate fuel cell. J Power Sources 2006;157:121–7.

Yoon SP, Kim HJ, Park BT, Nam SW, Han J, Lim TN, et al. Mixed-fuels fuel cell running on methane-air mixture. J Fuel Cell Sci Technol 2006;3:83–6.

2005

Selvaraj M, Jeon SH, Han J, Sinha PK, Lee TG. A novel route to produce 4-t-butyltoluene by t-butylation of toluene with t-butylalcohol over mesoporous Al-MCM-41 molecular sieves. Appl Catal A Gen 2005;286:44–51.

Kim J, Lee JW, Lee TG, Nam SW, Han J. Nanostructured titania membranes with improved thermal stability. J Mater Sci 2005;40:1797–9.

Selvaraj M, Him BH, Han J, Lee TG. t-Butylation of 1,2-dihydroxybenzene over mesoporous solid acid catalysts.

Vo NXP, Yoon SP, Nam SW, Han JH, Lim TH, Hong SA. Fabrication of an Anode-Supported Sofc with a Sol-Gel Coating Method for a Mixed-Gas Fuel Cell. Key Eng Mater 2005;277–279:455–61.

Yu HB, Kim JH, Lee HI, Scibioh MA, Lee J, Han J, et al. Development of nanophase CeO2-Pt/C cathode catalyst for direct methanol fuel cell. J Power Sources 2005;140:59–65.

2004

Yoon SP, Han J, Nam SW, Lim TH, Hong SA. Improvement of anode performance by surface modification for solid oxide fuel cell running on hydrocarbon fuel. J Power Sources 2004;136:30–6.

Kim SG, Yoon SP, Han J, Nam SW, Lim TH, Oh IH, et al. A study on the chemical stability and electrode performance of modified NiO cathodes for molten carbonate fuel cells. Electrochim Acta 2004;49:3081–9.

Ryu BH, Yoon SP, Han J, Nam SW, Lim TH, Hong SA, et al. In situ oxidation/lithiation of Ni-Co alloy in the molten Li 0.62/K0.38 carbonates eutectics. Electrochim Acta 2004;50:189–98.

Jung CR, Han J, Nam SW, Lim TH, Hong SA, Lee HI. Selective oxidation of CO over CuO-CeO2 catalyst: Effect of calcination temperature. Catal Today, vol. 93–95, 2004, p. 183–90.

Ryu BH, Han J, Yoon SP, Nam SW, Lim TH, Hong SA, et al. Dissolution behavior of Co-coated NiO cathode in molten (Li 0.62K0.38)2CO3 eutectics. J Power Sources 2004;137:62–70.

Kim S, Woo Nam S, Yoon S, Hyun S, Han J, Lim T, et al. Sol-gel processing of yttria-stabilized zirconia films derived from the zirconium n-butoxide-acetic acid-nitric acid-water-isopropanol system.

Yoon SP, Nam SW, Han J, Lim TH, Hong SA, Hyun SH. Effect of electrode microstructure on gas-phase diffusion in solid oxide fuel cells. Solid State Ion 2004;166:1–11.

2003

Kim S-G, Hong M-Z, Sung P, Yoon J, Han S, Woo N, et al. Preparation of YSZ Coated AISI-Type 316L Stainless Steel by the Sol-Gel Coating Method and Its Corrosion Behavior in Molten Carbonate. vol. 28. 2003.

Kim S-G, Yoon SP, Han J, Woo Nam S, Lim T-H, Hong S-A, et al. A stabilized NiO cathode prepared by sol-impregnation of LiCoO 2 precursors for molten carbonate fuel cells.